Printing on Glass, Metal, Timber and Tiles in Melbourne
Not just walls. Our vertical UV printer prints directly onto glass partitions, metal panels, timber and tiles – sharp, full-colour graphics with no vinyl film to bubble or peel.
Surfaces We Print
Beyond the wall
If it’s solid and flat or gently textured, there’s a good chance we can print on it. Send a photo and we’ll confirm.
Glass Partitions & Windows
Privacy bands, logos and artwork printed straight onto glass.
Metal Panels & Doors
Lift doors, cladding and panels for branding and wayfinding.
Timber
Feature panels, doors and joinery with printed artwork.
Tiles & Ceramics
Splashbacks and tiled walls updated without re-tiling.
Glass Printing
Privacy and branding on glass
We print frosted-look privacy bands, full-colour logos and artwork directly onto glass partitions, doors and windows.
- Privacy bands with a frosted look at eye level
- Logos and artwork in full colour on clear glass
- Free digital preview of your design on a photo of your glass
Compare
Direct printing vs vinyl film
Both put graphics on glass and metal. The difference is how they look up close and how long they last.
| Direct printing | Vinyl film | |
|---|---|---|
| How it’s applied | Printed directly on the surface | Cut or printed film, stuck on |
| Bubbles and edges | None – no film | Bubbles and lifting edges over time |
| Detail | Fine detail and full colour | Limited on cut vinyl |
| Timber and tiles | Yes | Smooth surfaces only |
| Seams | None on large panels | Joins on large panels |
| Removing it later | Options for each surface | Peel, then clean off adhesive |
Metal Panels & Doors
Metal panels, doors and lifts
We print on metal cladding, doors, lift doors and panels. We test the surface first and prime where needed for a strong bond.
Send photos
The surface, sizes and your artwork.
Test patch
We check adhesion on your surface.
Prime & print
Primer where needed, then print.
Seal if needed
Clear coat for high-touch areas.
Removal Options
Need it removed later?
Leases end and brands change. We explain how each print can be removed or covered before we start.
How removal works
Glass
Usually removed with a scraper and cleaner.
Metal
Removed with a suitable cleaner or painted over.
Timber
Sanded back or painted over.
Tiles
Removed with a suitable cleaner, depending on the glaze.
Popular Questions
Glass, metal, timber and tile FAQs
Can you print on glass partitions?
Yes, including frosted-look privacy bands and full-colour logos.
Can you print on lift doors and metal?
Yes. We test the surface first and prime if needed.
Can you print on tiles?
Yes. We print on tiled walls and splashbacks without re-tiling.
Can the print be removed later?
Usually, yes. The method depends on the surface.
Is it durable in busy areas?
For doors and high-touch areas we add a clear protective coat.
What files do you need?
Vector logos (AI, EPS, SVG or PDF) and high-resolution images for artwork.
Keep Exploring
More printing options
Get a free surface printing quote
Tell us about the surface and your design and we’ll reply within 24 hours with a preview and a fixed quote.
